DocumentsOtherDec 15, 2025Page 27
Development Variance Permit DVP25-0001 – 932 Rowils Crescent
Development Variance Permit DVP25-0001 to allow a panhandle lot in the R2 zone and to reduce front and rear lot line setbacks to permit duplexes on proposed lots, subject to a Section 219 covenant limiting density.
Key facts
- Address: 932 Rowils Crescent
- Variances: permit panhandle lot in R2 zone; front setback from 3.0m to 1.5m; rear setback from 3.0m to 1.51m
- Condition: Section 219 covenant limiting each lot to maximum of two dwelling units
CITY OF LANGFORD
DEVELOPMENT VARIANCE PERMIT
That Development Variance Permit No. DVP25-0001 be issued by the Council for the City of Langford to Sam Lawless of Citta Construction Ltd. on behalf of Kayla Jadresko by varying Zoning Bylaw No. 1000 to allow a residential development at the property at 932 Rowils Crescent, pursuant to section 493 of the Local Government Act, and subject to the following:
Appendix
The site be developed in substantial compliance with the site plan attached (Appendix A), including: a) That a northern interior lot line setback of at least 7.5 m is provided for both proposed lots, subject to confirmation of the SPEA by a Qualified Environmental Professional;
b) That a southern interior lot line setback of at least 5.0 m is provided for proposed lot A/B; and
c) That a southern interior lot line setback of at least 9.7 m is provided for proposed lot C/D.Variances
The following regulations of Zoning Bylaw No. 300 be varied pursuant to section 498 of the Local Government Act: a) That section 6.22.02(4) be varied to permit a panhandle lot in the R2 Zone;
b) That section 6.22.07(1)(a) be varied to reduce the front lot line setback from the required 3.0 m to 1.50 m for both proposed dwellings; and
c) That section 6.22.07(1)(b) be varied to reduce the rear lot line setback from the required 3.0 m to 1.51 m for both proposed dwellings.Conditions
The following requirement be imposed pursuant to section 498 of the Local Government Act: a) That a Section 219 Covenant limiting the density of development on each to a maximum of two dwelling units is registered, to the satisfaction of the Director Community Planning and Development Services prior to subdivision approval.